The Role Of Oil Mist Separator In The Manufacturing Plant

“A filtration system which eliminates oil mist from the exhaust air, thereby creating a cleaner and safer environment.”

Oil mist separators are an important component used for the extraction and filtration of oil mist. Typically, they are used for large-scale compressors, gas and steam turbines, as well as generators and other equipment with oil systems. Oil mist eliminators ensure clean, oil-free exhaust air.

As particles are removed, what left behind is clean uncontaminated oil.

An oil mist separator operates by using the coalescing effect inside a filtering unit. Oil-laden air is led into the filer by way of vacuum. A side channel vacuum pump creates the suction which can be adjusted manually via an additional air valve.

The air flows through the inlet tube then onto the cavity, then through the filter house. Once here, the fine oil droplets join with larger droplets and are retained in the fibers. The oil droplets in the air stream are led through a series of microfiber cartridges which make up the oil mist separator.

Read more at the original source: http://www.kimre.com/role-oil-mist-separator-manufacturing-plant/

Contact Details: 

Kimre – Clean Air Technology

744 SW 1st Street,

Homestead, Florida 33030 USA

Phone No: (305) 233-4249

Email: sales@kimre.com

Asphalt Paving Plants And Wet Scrubbers

Asphalt is a sticky, black, and highly viscous liquid or semi-solid form of petroleum. Hot asphalt is mixed at 300-350 degrees and needs to be laid hot, therefore it must be produced close to where it is being used. Asphalt plants can be set up on construction sites that need a steady supply of asphalt. This is convenient and allows for the readily supply hot asphalt. In turn for such a convenience, wet scrubber should be utilized to keep your asphalt plant in EPA compliance. Environmental protection laws have developed stringent codes in regard to the limit of water flow and particulate and smoke emissions from asphalt plants. Asphalt and Concrete is an extremely integral part of the infrastructure of modern life and its production is a growing sector of industrial production. Asphalt concrete is used in many different applications, most commonly in the construction of highways and roads. 90 percent of paved roads in the United States are paved with asphalt.

To read more, visit the source: http://www.kimre.com/asphalt-paving-plants-and-wet-scrubbers/

Contact Details:
Kimre – Clean Air Technology
744 SW 1st Street,
Homestead, Florida 33030 USA
Phone No: (305) 233-4249
Email: sales@kimre.com
.

Trap Solvent Airborne Particles With Mist Eliminator Filters

Mist eliminator pads and proper engineering go hand in hand when it comes to trapping airborne particles and maintaining an optimally functioning system. Particulate matter is the sum of all solid and liquid particles suspended in air, many of which are hazardous. Generally, these are divided into coarse and fine particles. Each has their own definition for measurement. They can be further classified as organic or inorganic in their origin. Some commonly would be known as dust, pollen, soot, smoke, and liquid droplets. They will vary in size and composition. Fine particles would be aerosols and vapors. Larger particles would be industrial dust from agricultural processes, uncovered soil, unpaved roads or mining operations. Everyday living such as traffic causes wear and tear on roads, producing particulate matter that we know as dust. Other common larger particulates are sea salt, pollen, mold and insect bodies.

Read more at the original source: http://www.kimre.com/trap-solvent-airborne-particles-mist-eliminator-filters/

Contact Details:

Kimre – Clean Air Technology

744 SW 1st Street,

Homestead, Florida 33030 USA

Phone No: (305) 233-4249

Email: sales@kimre.com

.

What is the Function of Wet Scrubbers in Industrial Processes?

For over 40 years, Kimre™ has been a respected leader in the design and implantation of wet scrubbers in plants around the globe. Generally, scrubbers are known for their function of “scrubbing” unwanted particles that find their way into the gas stream. Wet Scrubbers are found in chemical plants, acid manufacturing plants and steel making plants, amongst others.  Wet scrubbers are utilized when a gas stream becomes contaminated by particulate or a gas, or a combination of both. Some gas pollutants could be ammonia, chlorine, or sulfur compounds. In the wet scrubber, these gasses will be dissolved or absorbed into the scrubbing liquid. The liquid many times is water, but can vary depending on the pollutant. In Industrial exhaust systems these harmful gasses or particulates must be removed to ensure optimal performance and compliance. Particulate matter is microscopic or liquid matter that finds its way into the gas stream. When the liquid comes into contact with the dust particulate, the heavier and coarser particles are washed out and carried down to make contact with the mist eliminator pads.

Read more at the original source: http://www.kimre.com/function-wet-scrubbers-industrial-processes

Contact Details: 

Kimre – Clean Air Technology 

744 SW 1st Street, 

Homestead, Florida 33030 USA 

Phone No: (305) 233-4249 

Email: sales@kimre.com 

Drift Eliminator’s And Uses In The Industry

The drift eliminator is an important component of most cooling towers used today in various industries where harmful droplets have the potential to be released into the environment. These droplets are composed of minerals, chemicals and water, which can impact not only the environment but your equipment. These harmful droplets are known as drift. Water loss from a cooling tower is inevitable, however making sure the water is harmless vapor is possible and essential. 

To address the loss of harmful droplets, a drift eliminator must be installed. However, a one-time installation is not the answer, there must be properly a designed product constructed of quality materials and maintenance to ensure proper functioning. 

Prior to explaining the components, we should elaborate on Kimre’s™ Driftor, Drift Eliminator.

Read more at the original source: http://www.kimre.com/drift-eliminators-uses-industry/

Contact Details: 

Kimre – Clean Air Technology 

744 SW 1st Street, 

Homestead, Florida 33030 USA 

Phone No: (305) 233-4249 

Email: sales@kimre.com 

. 

Maintain Uniform Volume and Flow with Tower Packing

One of the most important factors in unit operations is distillation. The distillation and cooling processes occur by utilizing the internals. Internals, as important as they are to the operation, are not easily accessible. This is why it is imperative to choose the proper internals for the tower. Having the best option possible will allow for less down time and more production.

Here is a list of differences between packed and tray towers as well as the advantages of choosing tower packing technology.

Packed Tower Design and Applications

Tower packing creates a large amount of surface area per volume where the liquid-vapor mass transfer will occur. The vertical positioning of the surfaces allows for far more even flow during which the vapor and liquid remain in continuous contact with the packed bed surfaces. Unlike the step*based contact of the tray bed tower, this process is uninterrupted, improving flow and increasing the overall volume of processed vapor.

This was a brief overview of the packed tower design and applications. If you’d like to consult our specialists and decide which of them is best for your process, feel free to contact us.

To read full post, view original source: http://www.kimre.com/maintain-uniform-volume-flow-tower-packing/

Contact Details:

Kimre – Clean Air Technology

744 SW 1st Street,

Homestead, Florida 33030 USA

Phone No: (305) 233-4249

Email: sales@kimre.com

The Emerging Role of The Oil Mist Separator in Preventing Air Pollution

Strick regulations regarding waste, health, safety and environmental issues are highly in effect.

Many of these regulations pertain to air pollution.

Air pollution can be caused by many things, from greenhouse gas emissions, to smoke particles, chemicals and oil amongst many others. This is one of the reasons why the important technology of oil mist separator has become very high demand.

Combined with Fiber Bed Filters, the Kimre B-GON® Mist Eliminator will do an excellent job trapping harmful oil droplets and keeping the indoor air quality optimal, thus minimizing hazards to employees and the environment.

The Kimre B-GON® Mist Eliminator is Kimre’s™ own proprietary technology.

Kimre offers full-service engineering and manufacturing, including delivery, installation, technical assistance and maintenance of our products.

Being the manufacturer we are able to offer our products at highly competitive rates.

Contact us today or visit our website for more information about this and other separation solutions.

To read full post, view original source: http://www.kimre.com/emerging-role-oil-mist-separator-preventing-air-pollution/

Contact Details:

Kimre – Clean Air Technology

744 SW 1st Street,

Homestead, Florida 33030 USA

Phone No: (305) 233-4249

Email: sales@kimre.com